Our Services: [Areas of Specialization] [Services Offered] [Base Clients] [Project Reference]

Intelligent Essence Sdn Bhd is a Company that is heavily involved in using Information Technology in achieving better things in life and making it easy for people to live. We are very focused in IT implementation and the use of Contents, Communication, Data, Design and Architecture, Interactive and Infotainment and related services within our specialization areas.
Here we are specializing in five (5) main broad areas namely
1.  Computer and Communication 2.  Intelligent Infrastructure Division 3.  Wireless Real Time Data Radio Network 4.  Security and Command and Control Solutions 5.  Data Conversion, Scanning, Field and GPS Survey Services Division
1.  Computer and Communication Division
	Information Technology Division comprises of four (4) business areas as follows: Hardware Software Communication PABX and IP Telephone
	IE represents various products through our long business relationships with both International and Local suppliers, and provides complete IT services which include Consultancy, Design, Supply, Delivery, Installation, Testing and Training for all of the products as follows:
	List of products supported, but not limited to:
	Hardware  Fujitsu, Hewlett Packard, Compaq, Sun Software  Standard Office Application, Human Resource Management System, Financial Information System, etc Communication  CISCO, Nortel, Lucent, AT&T PABX CISCO, Nortel, Lucent, Alcatel
2.  Intelligent Infrastructure Division
	Intelligent Infrastructure Division provides products and services that help customers improve their overall building, facilities and transportation performance. These product and services is comprised of four (4) business areas as follows: Intelligent Building Management System Supervisory Control and Data Acquisition System ("SCADA"), Monitoring and Distribution Automation Intelligent Transportation Management System Central Command Center
	Intelligent Building Management System
	Intelligent Building Management System ("IBMS") produces Advanced Building Management and Control capabilities for the users. This is done through detail design of building subsystems based on our Standards and Specifications for building. As a company that support open protocol and connectivity, Spatial Intelligence develops IBMS systems around hardware and software which are proven in the market and allows interoperability at the lowest level. The following are some of the products represented or used in our projects:
	Hardware - Honeywell, Alerton, American Auto Matrix   Software - Innovex, Honeywell, Eutech   Card Access System - Castle, Elid   Variable Message Sign - Alpha, Olympex   Kiosk   CCTV - Philips, Burle
	Supervisory Control and Data Acquisition System ("SCADA"), Monitoring and Distribution Automation
	Supervisory Control and Data Acquisition System ("SCADA") and monitoring are developed around the same environment as adopted in IBMS. This is to ensure standard development environment and communication protocols for any facilities within any particular development.  List of products supported, but not limited to:   Hardware - Honeywell, Omron, Adam   Software - Innovex, Honeywell, Eutech Distribution Automation involves various other activities such as setting up of Regional Control Center, Master Control Center, National Load Dispatch Center, Independent Grid Supervisory Officer, Sub Station Automation and so on. These requirements are unique to Tenaga Nasional Berhad, being the only organization that produces, transmits, distributes and retails electricity in Malaysia. In order to support the above requirement, IE is currently working with various solution providers for the implementation on these specialized requirements. List of products supported, but not limited to:   Hardware - ABB, Siemens, Nokia, Nera, CISCO   Software - CISCO Works Manager
	Intelligent Transportation Management System
	Intelligent Traffic Monitoring System - Peek Traffic System   Geographical Positioning System - Motorola   VHF Communication System - Motorola   Personal Locator - Signatron   Radio Geolocation Technologies The location and tracking of people or critical assets requires a tagging device that is small, inexpensive, and useful in urban situations. Power consumption should be low, and it should be possible to locate the device in a wide area with a high degree of accuracy. Location information should be instantly available to the user through an on-screen map.  Radio geolocation technologies is an accurate and economical system that pinpoints location with a novel signal-processing algorithm, using signals received from a small, low-power, transmitting tag. It uses little frequency spectrum and can overlay existing mobile cellular channels. The receiving stations are inexpensive and can provide wide-area location coverage through integration with existing cellular base stations. A stand-alone version of the base station also exists. The patented method for locating the tagging signal features higher accuracy than conventional triangulation methods, less sensitivity to multipath and fading, and low operating costs.
	Central Command Center
	Central Command Center becomes the focal point and one-stop center for standard and quality services including utilities, transportation, community and other intelligent services. It acts as the nerve center providing services among inter agencies such as the utility and service providers, the travelers, commercial or residential community. CCC also acts as a central monitoring hub through which all services in the center are integrated, managed and monitored. List of products supported, but not limited to:
	Audio Visual System  Projection System  Call Center System - Applix Help Desk System  Incident and Emergency System - Positron 999  Communication System - CTI, ACD, Voice Recording, IVRS  Room design and preparation
3.  Wireless Real Time Data Radio
	In a SCADA system environment, Wireless Real Time Data Radio Network typically running a half duplex at speed of 1,200 bps up to 19,200 bps. System consists of Master Stations, Repeater Stations and thousands of RTU stations nationwide running on various industries standard protocols such as IEC 101, DNP3, Wisp++, Talus etc. Wireless Real Time Data Radio network can further be divided into:
	Master and Repeater Stations
	Master Stations is normally located at Central and Regional Control Centres. The Master Stations are the last stations where data are collected via Wireless Real Time Data Radio before it is channeled to the SCADA system concentrator or multiplexer unit. Repeater Stations are required in order to extend the coverage of the radio or to provide redundancy in the system. Master Station can communicate with a Repeater Stations on a full duplex transmission, while with the Customer Premise Wireless Radio Modem on a half duplex transmission. Both Master and Repeater Stations are subjected to Apparatus Assignment license from Malaysian Communication and Multimedia Commission.
	Customer Premise Wireless Radio Modem
	Customer Premise Wireless Radio Modem is normally installed at the location of the customer’s devices such as RTU, Power Quality, Disturbance Recorder, Energy Meters etc. Communication between Wireless Radio Modem and customer’s devices is normally via Serial Connection. In typical SCADA requirements, the number of Wireless Radio Modem will be dependant on the number of RTU sub stations being installed; hence quantities can reach into thousands. Wireless Radio Modem is not subjected to Apparatus Assignment license from Malaysian Communication and Multimedia Commission.
	Network Control Centre
	Network Control Centre is important to ensure Wireless Data Radio 24 x 7 operations is running smoothly and not interrupted. A well design Network Control Centre will comprises with ergonomic operator workstations and Wall Display. This center will normally be equipped with communication equipment to collect and disseminate data from the systems to the end users, voice communications infrastructure and other messaging devices such as SMS, pager or e-mail facilities.
4.  Security and Command and Control Solutions
	Security and Command and Control Center become the focal point and priority areas in many high profile organizations and facilities. In the wake of international terrorist attacks worldwide, organizations are starting to protect their assets and facilities by implementing many security solutions currently available. Among the popular technology are Microwave, Infra Red and Cable detection systems. Security and Command and Control solutions can further be divided into:
	Perimeter Intrusion Detection Systems
	There are many technologies available for Perimeter Intrusion Detection System. Among them are:  Microwave Infra Red Detection Cable CCTV Perimeter Intrusion Detection Systems are normally designed either at the external part (close to the fencing line) of a complex or facilities, Roof Top or even inside behind a physical wall, doors etc.
	Card Access Systems
	Card Access System is normally installed at the following doors:  Main entrance and Exit High security rooms Special purpose rooms
	CCTV Systems
	In order to compliment Perimeter Intrusion Detection System, CCTV is normally installed to provide real time video images of the events and also for recording purposes. CCTV system will be configured with both day and night cameras.
	Contactless Identification Systems
	Contactless Identification Systems is critical in order to identify authorized personnel, contractors, general workers and also general public that will be coming in and out of a building or facilities. Contactless Identification Systems can also be integrated with Card Access Systems.
	Car Park and Barrier Gate Systems
	Car Park and Barrier Gate Systems is used in order to provide vehicle access to authorized personnel, contractors, general workers and also general public that will be coming in and out of a building or facilities parking areas. Car Park and Barrier Gate Systems can also be integrated with Card Access Systems.
	Intercom / PABX Systems
	Intercom / PABX system is required for large building / facilities. This is to enable Control Centre operators to communicate to the users within the building / facilities or to communicate to external users.
	Command and Control Integrated Management Software
	Command and Control Integrated Management System is required to integrate the entire sub systems installed above for better operation and information dissemination. The system will then project relevant images or computer screens to the Wall Display for viewing.
	Wall Display and Wall Display Processor
	Wall Display and Wall Processors are mandatory for all Command and Control Centre. A good and well-designed Wall Display will provide good working ambiance to the operator and ease the pressure of having to work on a 24 x 7 basis. The bigger the Display, the more number of screens can be projected and hence more number of events can be viewed at the same time. A Wall Processors is required to provide multiple viewing screens with different resolutions to be projected at the same time. Wall Processors will also enable input sources from multiple formats to be processed and projected on the same Display. The following are some of the products represented or used in our projects:
	Hardware (Microwave, Infra Red, Detection Cable) – Southwest Microwave    Software – Southwest Microwave, ISM    Card Access System – Castle, Elid    Variable Message Sign – Alpha, Olympex    Wall Display – Clarity    Wall Processors – Jupiter, Zandar    CCTV – Philips, Burle, SYAC    Intercom – Commend
5. Data Conversion, Scanning, Field Survey Services Division
	The services performed here are digital data conversion / capture in various areas such as engineering, architecture, mining, cartography, electric supply, telecommunication, water supply and many other fields involving Computer Aided Design (CAD), Geographical Information System (GIS) / Land Information System (LIS) or Automated Mapping (AM) / Facilities Management (FM). The Conversion Bureau Service offers data capture services for drawings conversion to various CAD formats be it engineering drawings, architectural plans, mechanical drawings, technical plans, schematic or maps.